Front Tilt Motor Inspection
WARNING:
- Handling a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the Service information before handling the front seat (side air bag integrated)". (See AIR BAG SYSTEM SERVICE WARNINGS [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .) (See AIR BAG SYSTEM SERVICE CAUTIONS [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .) (See AIR BAG SYSTEM SERVICE WARNINGS [STANDARD DEPLOYMENT CONTROL SYSTEM] .) (See AIR BAG SYSTEM SERVICE CAUTIONS [STANDARD DEPLOYMENT CONTROL SYSTEM] .)
CAUTION:
- When performing the procedure with a front seat removed from the vehicle, perform the procedure on a clean cloth so as not to damage or soil the seat.
NOTE:
- When removing the front seat from the vehicle or putting it back in, it can be performed smoothly by removing the headrest.
- Disconnect the negative battery cable and wait for 1 min . (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
- Disconnect the front tilt motor connector.
- Apply battery positive voltage to the front tilt motor terminals and inspect the front seat operation.
- If not as specified, replace the front seat cushion frame. (See
FRONT SEAT CUSHION FRAME REMOVAL/INSTALLATION .)
Front seat operation Connection B D Up GND B+ Down B+ GND
- If not as specified, replace the front seat cushion frame. (See
FRONT SEAT CUSHION FRAME REMOVAL/INSTALLATION .)