LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Entertainment System >> Condenser Removal/Installation >> Notes

Condenser Removal/Installation: Notes

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the following parts:
    1. Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION .)
    2. Trunk end trim (LH) (See TRUNK END TRIM REMOVAL/INSTALLATION .)
    3. Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
    4. Trunk side trim (LH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
    5. D-pillar trim (LH) (See D-PILLAR TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: D-Pillar LH, Condenser, Connector And Mounting Bolt With Torque Specifications
    G09077694Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolts.
  5. Remove the condenser.
  6. Install in the reverse order of removal. (See CONDENSER INSTALLATION NOTE .)
scientia non olet · About LEMON Manuals