LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> CX-5 Grand Touring, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Engine Starting System >> Starter Interlock Switch Inspection

Starter Interlock Switch Inspection

CAUTION:
  • Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Disconnect the starter interlock switch connector.
  3. Verify that the continuity is as indicated in the table using a tester.
    Fig 1: Identifying Starter Interlock Switch Connector Terminals
    G06733974Courtesy of MAZDA MOTORS CORP.
    • If the continuity is not as indicated in the table, replace the starter interlock switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION .)
      Fig 2: Continuity Reference Chart
      G06151032Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals