LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Center Display Personalization Features Setting Procedure >> Lane Departure Warning System (LDWS)

Lane Departure Warning System (LDWS)

  1. Switch the ignition ON (engine off or on).
  2. Select [Settings] on the center display.
  3. Select [Safety] on the center display.
  4. Select [Lane Departure Warning System] on the center display.
  5. Select an item name, and then select option.
Display of center display Function Initial setting Settings Control module
Timing The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed. Before Line At Line/Before Line FSC
Warning The warning operation sensitivity of the lane departure warning system (LDWS) can be changed. Low High/Low FSC
Sound The type of the LDWS warning alarm can be changed. Beep Beep/Rumble Instrument cluster
Beep Volume The volume of the LDWS warning alarm (Beep) can be changed. High or Low(1) High/Low Instrument cluster
Rumble Strip Volume The volume of the LDWS warning alarm (Rumble) can be changed. High or Low(1) High/Mid/Low Instrument cluster
Reset Returns the setting content of the lane departure warning system to the initial setting. No No/Yes
  • FSC
  • Instrument cluster
(1) The initial value differs depending on the market.
scientia non olet · About LEMON Manuals