Rotating only front or rear wheels
- If only the front or rear wheels are rotated, the DSC HU/CM will determine that the DSC is malfunctioning. It will also determine that the vehicle control module is malfunctioning and the following warning lights will be illuminated or flashed.
- Mazda radar cruise control (MRCC) warning light (amber) is flashed
- Master warning light is illuminated
- If the warning light is illuminated or flashed, remove the vehicle from the chassis dynamometer and switch the ignition off.
- Switch the ignition back ON and drive the vehicle at 10 km/h {6.2 mph} or more to verify that the warning light turns off.
- Because DTCs are stored, clear DTCs according to the memory clearing procedure.