Pre-Delivery Inspection Table: Exterior
INSPECT and ADJUST , if necessary, the following items to specification:
- Glass, exterior bright metal and paint for damage
- Wheel lug nuts
- All weatherstrips for damage or detachment
- Adjust tire pressures to specification
- Adjust the tire pressures when the tires are cool.
- Specified pressure is indicated on the door label.
| Tire pressure record | ||||
| Left front | Right front | Left rear | Right rear | Spare |
- After adjusting the tire pressures, switch the ignition ON (engine off or on) and long-press the tire pressure monitoring system set switch until the tire pressure warning light flashes two times and the buzzer sounds one time (with tire pressure monitoring system switch).
| Indicated that long-pressing of the tire pressure monitoring system set switch was implemented |
| Yes or No |
- Headlight cleaner and fluid level (if equipped)
- Operation of hood release and lock
- Operation of fuel-filler lid opener
- Door operation and alignment including side door and back door
- Headlight aiming
INSTALL the following parts:
- Wheel caps or rings (if equipped)