After road test
INSPECT for necessary owner information materials, tools, and spare tire in vehicle
The following items must be completed just before delivery to your customer.
- Load test battery and charge if necessary (Load test result: Volts)
- Adjust tire pressures to specification
- Adjust the tire pressures when the tire are cool.
- Specified pressure is indicated on the door label.
| Tire pressure record | ||||
| Left front | Right front | Left rear | Right rear | Spare |
- After adjusting the tire pressures, switch the ignition ON (engine off or on) and long-press the tire pressure monitoring system set switch until the tire pressure warning light flashes two times and the buzzer sounds one time (with tire pressure monitoring system switch).
| Indicated that long-pressing of the tire pressure monitoring system set switch was implemented |
| Yes or No |
- Clean outside of vehicle
- Remove seat and cabin carpet protective covers
- Vacuum inside of vehicle