LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (On-Board Diagnostic - Dynamic Stability Control System) >> On-Board Diagnosis >> Snapshot Data Access Procedure

Snapshot Data Access Procedure

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "ABS".
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the IDS screen.
  4. Retrieve the snapshot data according to the directions on the IDS screen.
    NOTE:
    • Snapshot data appears at the top of the help screen when the displayed DTC is selected.
    • The snapshot data stores the currently detected DTC data.
scientia non olet · About LEMON Manuals