LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Seat Belt System) >> Front Buckle Removal/Installation >> Driver-side

Front Buckle Removal/Installation: Driver-side

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable and wait for 1 min or more  . (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5] .)
  2. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  3. Disconnect the front buckle connector.
    Fig 1: Disconnecting Front Buckle Connector
    G09076262Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolt.
  5. Remove the front buckle.
  6. Install in the reverse order of removal.
    Fig 2: Front Buckle Bolt With Torque Specifications
    G09787235Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals