LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Technical Data [Suspension System]) >> Suspension Technical Data

Suspension Technical Data

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
FRONT WHEEL ALIGNMENT SPECIFICATION

Item Fuel gauge indication
Empty 1/4 1/2 3/4 Full
Maximum steering angle [Tolerance ±3°] Inner 38°36'
Outer 31°54'
Total toe-in Tire [Tolerance ±4 {0.2}] (mm {in}) 2 {0.08}
Rim inner [Tolerance ±3 {0.1}] 1.0 {0.04}
(degree) 0°10'±0°20'
Caster angle(2) (Reference value) [Tolerance ±1°] 6°08' 6°11' 6°13' 6°15' 6°17'
Camber angle(2) (Reference value) [Tolerance ±1°] -0°17' -0°17' -0°18' -0°18' -0°19'
Steering axis inclination (Reference value) 15°07' 15°08' 15°09' 15°09' 15°10'
(1) Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
(2) Difference between left and right must not exceed 1°30'.
REAR WHEEL ALIGNMENT SPECIFICATION

Item Fuel gauge indication
Empty 1/4 1/2 3/4 Full
Total toe-in Tire [Tolerance ±4 {0.2}] (mm {in}) 2 {0.08}
Rim inner [Tolerance ±3 {0.1}] 1.0 {0.04}
(degree) 0°10'±0°20'
Camber angle(2) (Reference value) [Tolerance ±1°] -0°53' -0°56' -0°58' -1°00' -1°03'
Thrust angle (Reference value) [Tolerance ±0°48'] 0°00'
(1) Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
(2) Difference between left and right must not exceed 1°30'.
SUSPENSION SPECIFICATION

Item Specification
Front lower arm ball joint stud starting torque 18 N.m {1.8 kgf.m, 13 ft.lbf} max.
Front lower arm ball joint stud rotational torque 3.2 N.m {33 kgf.cm, 28 in.lbf} max.
Front stabilizer control link ball joint starting torque 0.8-3.5 N.m {8.2-35 kgf.cm, 7.1-30 in.lbf}
Rear stabilizer control link ball joint starting torque 0.8-3.5 N.m {8.2-35 kgf.cm, 7.1-30 in.lbf}
STANDARD TIRE AND WHEEL SPECIFICATION (EXCEPT MEXICO)

Item Specification
Wheel Size 17 x 7 1/2J 19 x 7 1/2J
Inset (mm {in}) 50 {2.0} 45 {1.8}
Pitch circle diameter (mm {in}) 114.3 {4.50}
Material Aluminum alloy
Tire Size P225/55R17 95V P225/45R19 92W
Air pressure (kPa {psi}) Front 250 {36} 240 {35}
Rear 250 {36} 240 {35}
Remaining tread (mm {in}) 1.6 {0.063} min.
Wheel and tire Lug nut tightening torque (N.m {kgf.m, ft.lbf}) 108-147 {12-14, 80-108}
Wheel and tire runout (mm {in}) Radial direction 1.5 {0.059} max.
Lateral direction 2.0 {0.079} max.
Wheel imbalance (g {oz}) Adhesive-type(1): 13 {0.46} max.
Knock-type(2): 8 {0.3} max.		 Adhesive-type(1): 12 {0.42} max.
Knock-type(2): 7 {0.2} max.
(1) Do not install three or more weights. Do not affix the weights such that they are parallel to each other or overlapping. The total weight of all the weights is 160 g {5.64 oz} or less. 
(2) Do not install three or more weights. One weight is 60 g {2.1 oz} or less  and two weights are 100 g {3.53 oz} or less. 
TEMPORARY SPARE TIRE AND WHEEL SPECIFICATION (EXCEPT MEXICO)

Item Specification
Wheel Size 17 x 4T
Inset (mm {in}) 35 {1.4}
Pitch circle diameter (mm {in}) 114.3 {4.50}
Material Steel
Tire Size T125/70D17 98M
Air pressure (kPa {psi}) 420 {60}
Remaining tread (mm {in}) 1.6 {0.063} min.
Wheel and tire Lug nut tightening torque (N.m {kgf.m, ft.lbf}) 108-147 {12-14, 80-108}
STANDARD TIRE AND WHEEL SPECIFICATION (MEXICO)

Item Specification
Wheel Size 17 x 7 1/2J 19 x 7 1/2J
Inset (mm {in}) 50 {2.0} 45 {1.8}
Pitch circle diameter (mm {in}) 114.3 {4.50}
Material Aluminum alloy
Tire Size 225/55R17 97V 225/45R19 92W
Air pressure (kPa {bar < psi >}) Front Up to 3 persons 230 {2.3, <33>}
Full load 250 {2.5, <36>}
Rear Up to 3 persons 230 {2.3, <33>}
Full load 320 {3.2, <46>}
Remaining tread (mm {in}) 1.6 {0.063} min.
Wheel and tire Lug nut tightening torque (N.m {kgf.m, ft.lbf}) 108-147 {12-14, 80-108}
Wheel and tire runout (mm {in}) Radial direction 1.5 {0.059} max.
Lateral direction 2.0 {0.079} max.
Wheel imbalance (g {oz}) Adhesive-type(1): 13 {0.46} max.
Knock-type(2): 8 {0.3} max.		 Adhesive-type(1): 12 {0.42} max.
Knock-type(2): 7 {0.2} max.
(1) Do not install three or more weights. Do not affix the weights such that they are parallel to each other or overlapping. The total weight of all the weights is 160 g {5.64 oz} or less. 
(2) Do not install three or more weights. One weight is 60 g {2.1 oz} or less  and two weights are 100 g {3.53 oz} or less. 
TEMPORARY SPARE TIRE AND WHEEL SPECIFICATION (MEXICO)

Item Specification
Wheel Size 16 x 5 J
Inset (mm {in}) 40 {1.6}
Pitch circle diameter (mm {in}) 114.3 {4.50}
Material Steel
Tire Size 185/55R16 87M
Air pressure (kPa {bar < psi >}) 320 {3.2, <46>}
Remaining tread (mm {in}) 1.6 {0.063} min.
Wheel and tire Lug nut tightening torque (N.m {kgf.m, ft.lbf}) 108-147 {12-14, 80-108}
scientia non olet · About LEMON Manuals