LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Lighting System) >> Front Fog Light Bulb Removal/Installation

Front Fog Light Bulb Removal/Installation

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5] .)
  2. Partially peel back the mudguard. (See MUDGUARD REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Identifying Front Fog Light Bulb And Connector
    G09788120Courtesy of MAZDA MOTORS CORP.
  4. Rotate the front fog light bulb in the direction of the arrow (1) shown in the figure and remove it from the front fog light in the direction of the arrow (2) shown in the figure.
    CAUTION:
    • A bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass.
  5. Install in the reverse order of removal.
    Fig 2: Removing Front Fog Light
    G09788121Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals