Without Bose®

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If the procedure is performed while holding the tweeter cone, it could deform the cone causing a malfunction. Therefore, perform the procedure while holding any part other than the cone.

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5] .)
Remove the side speaker grille. (See SPEAKER GRILLE REMOVAL/INSTALLATION .)
Remove the screws.
Remove the tweeter.

Fig 1: Identifying Tweeter And Screw
Courtesy of MAZDA MOTORS CORP.
Disconnect the connector.
Install in the reverse order of removal.

Fig 2: Identifying Tweeter And Connector
Courtesy of MAZDA MOTORS CORP.