LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Drive Shaft) >> Front Drive Shaft Removal/Installation >> Locknut Installation Note

Locknut Installation Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. After tightening the locknut once at a torque of 100-150 N.m {11-15 kgf.m, 74-110 ft.lbf}  , loosen it 180 degrees  once, and then retighten it at a torque of 236-274 N.m {25-27 kgf.m, 175-202 ft.lbf}  .
scientia non olet · About LEMON Manuals