LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Drive Shaft) >> Front Drive Shaft (Double Offset Joint) Disassembly/Assembly >> Boot Assembly Note

Boot Assembly Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The wheel-side and transaxle-side boots are different.
  1. Fill the boot (wheel side) with the specified grease.
    NOTE:
    • Do not touch grease with your hand. Apply it from the tube to prevent foreign matter from entering the boot.

    Grease amount 

    95-115 g {3.4-4.0 oz} 

  2. Install the boot with the splines of the shaft still wrapped in tape from disassembly.
  3. Remove the tape.
scientia non olet · About LEMON Manuals