DTC C200B 1C/C200C 1C: Torque Sensor: Notes

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

DTC C200B:1C/C200C:1C DETECTION CONDITIONS AND POSSIBLE CAUSES

DTC C200B:1C, C200C:1C	Torque sensor
DETECTION CONDITION	Open or short circuit is detected in torque sensor circuit
FAIL-SAFE FUNCTION	Control disabled Power steering malfunction indicator light: Illuminated
POSSIBLE CAUSE	Open or short circuit in wiring harness between the EPS CM terminals and torque sensor. Poor connection at connectors Torque sensor malfunction EPS CM malfunction
SYSTEM WIRING DIAGRAM	Not applicable