LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Airbag System (Two-Step Deployment Control System)) >> Curtain Air Bag Module Removal/Installation [Two-Step Deployment Control System] >> Clip Removal Note

Clip Removal Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull out the pin with flathead screwdriver as shown in the figure.
    Fig 1: Pulling Out Pin With Flathead Screwdriver
    G09076063Courtesy of MAZDA MOTORS CORP.
  2. Insert a flathead screwdriver into shown in the figure.
    Fig 2: Inserting Flathead Screwdriver Into Curtain Air Bag Module
    G09076165Courtesy of MAZDA MOTORS CORP.
  3. While pulling the curtain air bag in the direction of the arrow shown in the figure (1), detach tabs by prying with a flathead screwdriver in the direction of the arrow (2) (3).
  4. Remove the clip from the body.
    Fig 3: Removing Clip From Body
    G09076065Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals