DTC B13D3 94/P1260 00 Security Indicator Light 13: Communication Error With Remote Transmitter: Notes
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
DTC: B13D3:94/P1260:00 (IMMOBILIZER SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Communication error with remote transmitter |
| Detection condition |
- Start stop unit could not detect the remote transmitter communication or communication error was detected.
|
| Fail-safe function |
Not applicable |
| Possible cause |
- When the ignition is switched ON (engine off or on), it is detected that the remote transmitter is outside of the vehicle.
- Push button start connector or terminal malfunction
- Start stop unit connector or terminal malfunction
- Remote transmitter malfunction
- Start stop unit malfunction
NOTE:
- If any of the following items are touching or near the remote transmitter, signal communication between the remote transmitter and the vehicle is negatively affected, resulting in the engine not starting.
- Spare keys
- Keys for other vehicles equipped with an immobilizer system
- Any metallic object
- Any electronic device, or any credit or other card with magnetic strips
- Radio wave outputting device nearby
|
| System wiring diagram |
Not applicable |