LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel-Filler Pipe Removal/Installation >> Dust Cover Removal Note

Dust Cover Removal Note

  1. Remove the rear mudguard (LH). (See MUDGUARD REMOVAL/INSTALLATION .)
  2. Release the dust cover tab using a flathead screwdriver as shown in the figure.
  3. Remove the dust cover.
    Fig 1: Removing Dust Cover
    G09782681Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals