Rear Wheel Alignment [16-Inch Wheel]
ITEM SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Total toe-in | Tire [Tolerance ±4 mm {0.15 in}] | (mm {in}) | 3 {0.12} |
| Rim inner | (mm {in}) | 1.8 ± 2.4 {0.071 ± 0.094} | |
| degree | 0°17' ± 22' | ||
| Camber [Tolerance ±1°] | Vehicle height: From the end of the rear fender to the center of the wheel (mm {in}) | 354-363 {14.0-14.2} | -1°33' |
| 364-373 {14.4-14.6} | -1°18' | ||
| 374-383 {14.8-15.0} | -1°04' | ||
| 384-393 {15.2-15.4} | -0°54' | ||
| 394-403 {15.6-15.8} | -0°45' | ||
NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right camber angle is within 1°.