LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (LF) >> Starter Interlock Switch Inspection

Starter Interlock Switch Inspection

CAUTION:
  • Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Disconnect the starter interlock switch connector.
  4. Verify that the continuity is as indicated in the illustration using a tester.
    Fig 1: Continuity Chart
    G04955153Courtesy of MAZDA MOTORS CORP.
    • If the continuity is not as indicated in the illustration, replace the starter interlock switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION .
      Fig 2: Starter Interlock Switch Connector
      G06151032Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals