LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Input/Output Check Mode >> Check Code Inspection >> Check code 57

Check code 57

CODE INSPECTION CONDITION CHART

Check code 57 Panel light control signal
INSPECTION CONDITION DISPLAY ACTION
Turn the headlight switch to the TNS position.
After selecting check code 57, wait for approx. 2 s. 		 on (FLASHING) Illumination light (hazard warning switch, center panel module, etc). flashes three times.  The panel light control signal is normal.
Except above. Verify that the voltage of instrument cluster terminal 1F is B+  .
  • If the voltage is as specified, replace the instrument cluster.
  • If the voltage is not as specified, inspect the following parts:
    • Illumination light (hazard warning switch, center panel module, etc).
    • Wiring harness (Instrument cluster-Illumination lights- TNS relay)
scientia non olet · About LEMON Manuals