Check code 22
CODE INSPECTION CONDITION CHART
| Check code 22 | Fuel level signal | ||
|---|---|---|---|
| STEP | INSPECTION CONDITION | DISPLAY | ACTION |
| 1 | Select check code 22 with the fuel gauge sender unit connector disconnected. | 252 1 255 |
Go to the next step. |
| Except above. | Go to Step 6. | ||
| 2 | Connect the terminals 2R and 2T of the instrument cluster. | 000 1 003 |
Go to the next step. |
| Except above. | Go to Step 6. | ||
| 3 | Using the SST (Fuel and thermometer checker) or resistor, input 20 ohms between instrument cluster terminals 2R and 2T. | 017 1 023 |
Go to the next step. |
| Except above. | Go to Step 6. | ||
| 4 | Using the SST (Fuel and thermometer checker) or resistor, input 60 ohms between instrument cluster terminals 2R and 2T. | 057 1 063 |
Go to the next step. |
| Except above. | Go to Step 6. | ||
| 5 | Using the SST (Fuel and thermometer checker) or resistor, input 100 ohms between instrument cluster terminals 2R and 2T. | 097 1 103 |
Inspect the fuel gauge sender unit. |
| Except above. | Go to the next step. | ||
| 6 | Inspect the wiring harness and connector between instrument cluster and fuel gauge sender unit.
|
||