Rear Window Glass Installation Note

Rear window glass or middle roof panel is newly replaced 

1. Adjust the rear window glass and middle roof panel gap and height difference so that it is within the specification. (See POWER RETRACTABLE HARDTOP ADJUSTMENT ).

Rear window glass or middle roof panel is reused 

1. Install the shim according to the number verified prior to removal.
2. Align the alignment marks applied before the rear window glass removal, install the rear window glass, and then remove the masking tape.
3. Refer to POWER RETRACTABLE HARDTOP ADJUSTMENT and verify that the gap and height difference between the rear window glass and middle roof panel are within the specifications. Adjust the power retractable hardtop if necessary. (See POWER RETRACTABLE HARDTOP ADJUSTMENT ).