Trunk Key Cylinder Switch Inspection

1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] )
2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION )
3. Remove the trunk key cylinder switch. (See TRUNK KEY CYLINDER REMOVAL/INSTALLATION )
4. Inspect for continuity between the trunk key cylinder switch terminals.
   • If not as specified, replace the trunk key cylinder.

Fig 1: Continuity Chart

Courtesy of MAZDA MOTORS CORP.

Fig 2: Trunk Lid Open Cancel Switch And Tab

Courtesy of MAZDA MOTORS CORP.