No. 1 Additional Key Programming Procedure (Using Two Valid Keys): Procedure
Courtesy of MAZDA MOTORS CORP. ADDITIONAL KEY PROGRAMMING PROCEDURE CHART
| Step |
Procedure |
Action after procedure |
| 1 |
LAUNCH PROGRAMMING MODE
- Turn the ignition switch to the ON position using key 1.
- After verifying that the security light illuminates for approx. 3 s
and turns off, turn the ignition switch to the LOCK position within approx. 4 s
using key 1.
- Remove key 1.
- Turn the ignition switch to the ON position using key 2.
- After verifying that the security light illuminates for approx. 3 s
and turns off, turn the ignition switch to the LOCK position within approx. 4 s
using key 2.
- Remove key 2.
|
Go to the next step. |
| 2 |
PERFORM ADDITIONAL KEY PROGRAMMING
- Turn the ignition switch to the ON position using key 3.
- Verify that the security light illuminates for approx. 3 s
, and then turns off.
- Remove key 3.
- Are there other keys to be programmed?
|
Yes |
Go back to Step 1. |
| No |
Go to the next step. |
| 3 |
VERIFY KEY PROGRAMMING IS CORRECT
- Verify that the engine can start and run for approx. 5 s or more using all the programmed keys.
NOTE:
- When verifying that the engine starts, wait at least approx. 5 s or more
before starting the engine using the next key.
|
Procedure is completed |