No. 7 Programming Procedure Due to Simultaneous Replacement of Immobilizer System-related Parts (PCM, Keyless Control Module, and Steering Lock Unit): Notes
CAUTION:
- The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
- The menu and execution sequence of the M-MDS vary depending on the type of replaced unit and parts. Perform the procedures referring to the following chart.
M-MDS menu
- Parameter Reset
- Ignition Key Code Erase and Program
- Program Additional advanced key
- Steering Lock Unit Programming
PARTS PROCEDURE CHART
| Replacement part | M-MDS execution menu/ sequence | Conditions | ||
|---|---|---|---|---|
| Keyless control module and PCM | (1)→(2)→(3)→(4) |
|
||
| Keyless control module and steering lock unit(1) | ||||
| Keyless control module, PCM, and steering lock unit(1) | ||||
| PCM and steering lock unit(1) | (1)→(2)→(4) | Have two or more keys to be programmed after the replacement. | ||
|
||||