No. 1 Additional Key Programming Procedure (Using Two Valid Keys): Procedure

Fig 1: Valid Key And Registration Key

Courtesy of MAZDA MOTORS CORP.

PROCEDURE CHART

Step	Procedure	Action after procedure
1	START ENGINE Start the engine using key 1. Verify that the security light illuminates for approx. 3 s , and then turns off. Turn the ignition switch to the LOCK position.	Go to the next step.
2	LAUNCH PROGRAMMING MODE Turn the ignition switch to the ON position using key 1. After verifying that the security light illuminates for approx. 3 s and turns off, turn the ignition switch to the LOCK position within approx. 4 s using key 1. Remove key 1. Turn the ignition switch to the ON position using key 2. After verifying that the security light illuminates for approx. 3 s and turns off, turn the ignition switch to the LOCK position within approx. 4 s using key 2. Remove key 2.	Go to the next step.
3	PERFORM ADDITIONAL KEY PROGRAMMING Turn the ignition switch to the ON position using key 3. Verify that the security light illuminates for approx. 3 s , and then turns off. Remove key 3. Are there other keys to be programmed?	Yes	Go back to Step 2.
3		No	Go to the next step.
4	VERIFY KEY PROGRAMMED CORRECTLY Verify that the engine can start and run for approx. 5 s or more using all the programmed keys. NOTE: When verifying that the engine starts, wait at least approx. 5 s or more before starting the engine using the next key.	Procedure is completed