Clearing Advanced Key

Fully lower the driver-side door glass.
Connect the M-MDS to the DLC-2.
Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
CAUTION:
- Protect the cable and body contact area with a clean rag, otherwise they could b damaged.
After vehicle identification, select the following from the M-MDS initial screen.

Fig 1: DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
- Using an IDS (laptop PC)
  1. Select "Body".
  2. Select "Security".
  3. Select "PATS Functions".
- Using a PDS (pocket PC):
  1. Select "Programming".
  2. Select "PATS Functions".
Then, select an item from the screen menu.
- Card Key Code Erase and Program
Perform the security access according to the directions on the M-MDS screen.