LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Lock System >> Advanced Key Id Code Registration >> With Two Programmed Advanced Keys

With Two Programmed Advanced Keys

  1. Bring the programmed advanced keys (2) and a unprogrammed advanced key into the vehicle.
  2. Close all doors.
  3. Insert the supplementary key into the ignition key cylinder.
    NOTE:
    • Complete the procedures up to Step 7 within 30 s  after the supplementary key is inserted.
  4. Turn the ignition switch to the ON position.
  5. Press the UNLOCK button on advanced key 1.
  6. Press the UNLOCK button on advanced key 2.
  7. From the ignition switch in the ON position, switch the ignition switch in the order indicated below.
    • ACC→ON→ACC→ON→ACC→ON
  8. Open the driver-side front door, press the door switch twice  , and then close the door.
    NOTE:
    • After Step 3 is completed and the advanced key programming mode is activated, the door lock actuator operates to lock, and then operates to unlock.
    • If the door lock actuator does not operate, repeat the procedure from Step 2.
  9. Press the UNLOCK button on the unprogrammed advanced key twice. 
    NOTE:
    • After Step 8 is completed and the advanced key is programmed, the door lock actuator operates to lock, and then operates to unlock.
  10. If programming more advanced keys, remove the supplementary key once, and then repeat the procedure from Step 2.
scientia non olet · About LEMON Manuals