LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> CX-9 Touring, 3.7L Eng VIN A, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Diagnostic Introduction >> On-Board Diagnostic Test >> Diagnostic Monitoring Test Results Access Procedure

Diagnostic Monitoring Test Results Access Procedure

  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Powertrain".
    2. Select "OBD Test Modes".
    3. Select "Mode 6 On-Board Test Results".
  3. Verify the diagnostic monitoring test result according to the directions on the screen.
    Fig 1: Identifying Data Link Connector - 2 Location
    G04969245Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals