Generator Warning Light
- Verify that the battery is fully charged.
- Verify that the generator and A/C drive belt is correct. (See
DRIVE BELT INSPECTION
.)
- With the ignition switch turned to the ON position, verify that the generator warning light illuminates.
- If it does not illuminate, inspect the generator warning light and the wiring harness.
- If the generator warning light and the wiring harness are normal, inspect the PCM.
- Verify that the generator warning light goes out after the engine is started.
- If it does not go out, inspect if any DTCs are displayed.
- If any DTCs are displayed, carry out troubleshooting according to the corresponding DTC inspection.