Transfer Oil Replacement

Remove the front under cover No. 2. (See FRONT UNDER COVER NO. 2 REMOVAL/INSTALLATION .)
Remove the drain plug with the washer.
Drain the oil into a suitable container.

Fig 1: Identifying Drain Plug And Washer
Courtesy of MAZDA MOTORS CORP.
Tighten the drain plug with a new washer.
Tightening torque 40-58 N.m {4.1-5.9 kgf.m, 30-42 ft.lbf}

Fig 2: Identifying Drain Plug And Washer
Courtesy of MAZDA MOTORS CORP.
Remove the oil level plug with the washer and add the specified amount and type of oil through the oil level plug hole until the level reaches the bottom of the oil level plug hole.
Transfer oil

Specified oil grade: API Service GL-5

Specified oil viscosity: SAE 80W-90

Capacity (approx quantity): 0.45 L {0.48 US qt, 0.40 Imp qt}

Fig 3: Checking Transfer Oil Level
Courtesy of MAZDA MOTORS CORP.
Tighten the oil level plug with a new washer.
Tightening torque 40-58 N.m {4.1-5.9 kgf.m, 30-42 ft.lbf}
Install the front under cover No. 2. (See FRONT UNDER COVER NO. 2 REMOVAL/INSTALLATION .)

Fig 4: Identifying Oil Level Plug And Washer
Courtesy of MAZDA MOTORS CORP.