LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> CX-5 Touring, 4D Utility, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> Drive Plate Removal/Installation >> Drive Plate Installation Bolts Removal Note

Drive Plate Installation Bolts Removal Note

  1. Set the SST  against the drive plate.
  2. Loosen the drive plate installation bolts uniformly in two or three steps in the order shown in the figure, then remove the bolts and the drive plate.
    Fig 1: Drive Plate Bolt Installation Sequence
    G09759618Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals