Check code 6

INSPECTION PROCEDURE (CHECK CODE 6)

Inspection procedure		Display	Action
Step 1	Press the H button to display check code 6. Switch the ignition ON (engine off or on). Verify the screen display.	Courtesy of MAZDA MOTORS CORP.	Go to the next step.
Step 1		Courtesy of MAZDA MOTORS CORP.	Refer to the clock inspection and verify the terminal voltage at clock terminal A. (See CLOCK INSPECTION .) Replace the clock if the voltage is B+. (See CLOCK REMOVAL/INSTALLATION .) Inspect the following parts if the voltage is 1.0 V or less. METER1 10 A fuse IG relay Related wiring harness
Step 2	Switch the ignition off (LOCK). Verify the screen display.	Courtesy of MAZDA MOTORS CORP.	Ignition switch ON/OFF signal is normal.
Step 2	Switch the ignition off (LOCK). Verify the screen display.	Courtesy of MAZDA MOTORS CORP.	Refer to the clock inspection and verify the terminal voltage at clock terminal A. (See CLOCK INSPECTION .) Replace the clock if the voltage is 1.0 V or more. (See CLOCK REMOVAL/INSTALLATION .) Inspect the following parts if the voltage is B+. METER1 10 A fuse IG relay Related wiring harness