LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> CX-5 Touring, 4D Utility, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Lock System >> LF Control Unit Removal/Installation

LF Control Unit Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the service hole cover on the front side trim.
    Fig 1: Identifying Service Hole Cover On Front Side Trim
    G09077065Courtesy of MAZDA MOTORS CORP.
  3. Disconnect the connector.
    Fig 2: Identifying Connector
    G09077066Courtesy of MAZDA MOTORS CORP.
  4. Pull the LF control unit in the direction of the arrow (2) shown in the figure and remove it while pressing the tab in the direction of the arrow (1).
    Fig 3: Pulling LF Control Unit
    G09077067Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals