Pre-Delivery Inspection Table: Exterior

INSPECT  and ADJUST  , if necessary, the following items to specification:

• Glass, exterior bright metal and paint for damage
• Wheel lug nuts
• All weatherstrips for damage or detachment
• Adjust tire pressures to specification
  • Adjust the tire pressures when the tire are cool.
  • Specified pressure is indicated on the door label.

  Tire pressure record
  Left front	Right front	Left rear	Right rear	Spare

• After adjusting the tire pressures, switch the ignition ON (engine off or on) and long-press the tire pressure monitoring system set switch unit the tire pressure warning light flashes two times and the buzzer sounds one time (with tire pressure monitoring system switch).

  Indicated that long-pressing of the tire pressure monitoring system set switch was implemented

  Yes or No

• Headlight cleaner and fluid level (if equipped)
• Operation of hood release and lock
• Operation of fuel-filler lid opener
• Door operation and alignment including side door and back door
• Headlight aiming

INSTALL  the following parts:

• Wheel caps or rings (if equipped)