LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> CX-5 Sport, 4D Utility, FWD, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Lock System >> Liftgate Lock Actuator Inspection

Liftgate Lock Actuator Inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    3. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    4. Liftgate latch and lock actuator (See LIFTGATE LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION .)
  3. Press in the latch lever of the liftgate latch and lock actuator using a flathead screwdriver, and set it to the latched condition.
    Fig 1: Pressing Latch Lever Of Liftgate Latch And Lock Actuator
    G09077051Courtesy of MAZDA MOTORS CORP.
  4. Connect terminal D to the positive battery voltage, connect terminal B to the ground, and verify that the latch lever is released and the condition changes to the unlatch condition.
    • If the operation cannot be verified, replace the liftgate latch and lock actuator.
      Fig 2: Connecting Terminal D To Positive Battery Voltage And Terminal B To Ground
      G09077052Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals