LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> CX-5 Sport, 4D Utility, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Lumbar Support Motor Inspection

Lumbar Support Motor Inspection

WARNING:
  1. Disconnect the negative battery cable and wait for 1 min  . (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Slide hook A in the order of arrows (1), (2), (3) shown in the figure and disconnect them from hook B.
    Fig 1: Sliding Hook A
    G09076938Courtesy of MAZDA MOTORS CORP.
  3. Open fasteners C.
  4. Disconnect the lumber support motor connector.
  5. Apply battery positive voltage to the lumber support motor terminals and inspect the front seat back operation.
    Fig 2: Identifying Lumber Support Motor Fasteners
    G09076939Courtesy of MAZDA MOTORS CORP.
    • If not as specified, replace the lumber support motor. (See LUMBAR SUPPORT MOTOR REMOVAL/INSTALLATION .)
      Front seat back operation Connection
      A B
      Forward B+ GND
      Backward GND B+
      Fig 3: Identifying Lumber Support Motor Terminals
      G09076940Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals