| DETECTION CONDITION |
- Under the following condition, input shaft and output shaft rotation ratio is 2.157 or more, or 1.249 or less for 3 times
Diagnostic support note
- The check engine light does not illuminate.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- PENDING CODE is not available.
- FREEZE FRAME DATA is not available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits 2GR
- Maximizes line pressure
- Inhibits feedback control
|
| POSSIBLE CAUSE |
- Deteriorated ATF
- ATF level low
- Solenoid valve malfunction
- Pressure control solenoid A
- Shift solenoid A
- Shift solenoid B
- Shift solenoid C
- Line pressure malfunction
- Stall speed malfunction
- Forward clutch slipping
- 2-4 brake band slipping
- Primary control valve body malfunction
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |