LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> 5 Touring >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Lock System >> Front Door Key Cylinder Switch Inspection

Front Door Key Cylinder Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
    2. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
    3. Front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
    4. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION .)
    5. Front inner handle (See INNER HANDLE REMOVAL/INSTALLATION .)
    6. Front door module panel (See FRONT DOOR MODULE PANEL REMOVAL/INSTALLATION .)
    7. Front door latch and lock actuator (See FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION .)
  3. Move the rod of the door key cylinder switch in the direction of the arrow shown below, and verify that the continuity is as indicated in the table.
    Fig 1: Moving Rod Of Door Key Cylinder Switch
    G08153061Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the front door latch and lock actuator.
      Fig 2: Front Door Key Cylinder Switch Continuity Table
      G08153062Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals