Flywheel Installation Note

Clean the crankshaft thread holes.
Install the flywheel to the crankshaft.
Temporarily tighten the new lock bolts.
Hold the flywheel using the SST

Fig 1: Flywheel Holding Tool Installed For Flywheel Installation With Flywheel Bolt Loosening/Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
Tighten the lock bolts completely in the order shown below and install the flywheel.
Tightening torque
- 108-116 N.m {11.1-11.8 kgf.m, 80-85 ft.lbf}