LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle >> Wheel Hub, Steering Knuckle Removal/Installation >> Locknut Removal Note

Locknut Removal Note

  1. Remove the locknut.
  2. Install a spare nut onto the drive shaft.
  3. Tap the nut with a copper hammer and separate the drive shaft from the axle.
  4. Separate the drive shaft from the wheel hub.
    Fig 1: Removing Locknut
    G09782931Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals