LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> 3 SV, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Controls (Introduction & DTC Index) >> On-Board Diagnostic Test >> Diagnostic Monitoring Test Results Access Procedure

Diagnostic Monitoring Test Results Access Procedure

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Powertrain".
    2. Select "OBD Test Modes".
    3. Select "Mode 6 On-Board Test Results".
  3. Verify the diagnostic monitoring test result according to the directions on the M-MDS screen.
scientia non olet · About LEMON Manuals