LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Shock Absorber And Coil Spring Disassembly/Assembly >> Mounting Rubber Installation Note

Mounting Rubber Installation Note

  1. Install the mounting rubber so that the mounting rubber stud and the front shock absorber bracket are in position A shown in the following figure.

    A: 0°±5° 

    Fig 1: Identifying Mounting Rubber Installation Angle
    G09770932Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals