LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Lighting System) >> Hazard Warning Switch Removal/Installation

Hazard Warning Switch Removal/Installation

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5] .)
  2. Remove the decoration panel (passenger-side). (See DECORATION PANEL REMOVAL/INSTALLATION .)
  3. While pressing the hazard warning switch tabs in the direction of the arrows (1) shown in the figure, press the hazard warning switch in the direction of the arrow (2) shown in the figure to detach the hazard warning switch tabs from the decoration panel (passenger-side).
    Fig 1: Removing Hazard Warning Switch
    G09788200Courtesy of MAZDA MOTORS CORP.
  4. Remove the hazard warning switch.
  5. Install in the reverse order of removal.
    Fig 2: Removing Hazard Warning Switch
    G09788201Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals