LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Control System) >> Knock Sensor (KS) Removal/Installation >> Notes

Knock Sensor (KS) Removal/Installation: Notes

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  4. Disconnect the KS connector.
  5. Remove the KS.
  6. Install in the reverse order of removal. (See KS INSTALLATION NOTE .)
    Fig 1: Lnock Sensor And Mounting Bolt With Torque Specifications
    G09785561Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals