LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Controls (Introduction & DTC Index) >> On-Board Diagnostic Test >> On-Board System Readiness Tests Access Procedure

On-Board System Readiness Tests Access Procedure

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Powertrain".
    2. Select "OBD Test Modes".
    3. Select "Mode 1 Powertrain Data".
    4. Select "PCM".
  3. Then, select the "***SUP" and "***EVAL" PIDs in the PID selection screen.
  4. Monitor those PIDs and verify that the system monitor is completed.
    NOTE:
    • If the on-board system readiness tests are not completed the PCM stores DTC P1000.
scientia non olet · About LEMON Manuals