Without Position Memory System

Disconnect the negative battery cable.
Remove the power window main switch. See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION . Note:
- The power outer mirror switch is integrated with the power window main switch.
Verify that the resistance between the power outer mirror switch terminals is as indicated in the table.
- If not as indicated in the table replace the power window main switch. See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .
Fig 1: Power Outer Mirror Switch Terminals Continuity Chart (Without Position Memory System)
Courtesy of MAZDA MOTORS CORP.

Fig 2: Power Outer Mirror Switch Circuit Diagram (Without Position Memory System)
Courtesy of MAZDA MOTORS CORP.
If not as indicated in the article, replace the power outer mirror switch.