Transfer Oil Inspection
- Park the vehicle on level ground.
- Remove the oil level plug with the washer.
- Checking by hand, verify that the oil is near the brim of the plug hole.
- If the oil level is low, add the specified amount and type of oil through the oil level plug hole.
Transfer oil
Specified oil grade: API Service GL-5
Specified oil viscosity: SAE 80W-90
Capacity (approx quantity): 0.45 L {0.48 US qt, 0.40 lmp qt}
- Tighten the oil level plug with a new washer.
Tightening torque 40-58 N.m {4.1-5.9 kgf.m, 30-42 ft.lbf}