LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System [Two-Step Deployment Control System] >> Side Air Bag Sensor Removal/Installation [Two-Step Deployment Control System] >> Connector Disconnect Note

Connector Disconnect Note

  1. Press the area (1) indicated by the arrow and slide it as shown in the figure (2).
    Fig 1: Removing Side Air Bag Sensor Connector Using Tape- Wrapped Screwdriver
    G09076175
  2. Lift up the location shown in the figure using a tape-wrapped flathead screwdriver (3) and disconnect the connector (4).
scientia non olet · About LEMON Manuals